How to clean your Mother Board

How to clean your cause, now is the time to do so. Look at the blades of the fan in the back of your computer. Even in each ventilation. Are there groups of dust? There are dirt caked on it? If so, the interior must be cleaned. If the fan blades clean, but already some years since you have cleaned the motherboard or if the computer is around cigarette smoke, you may need to be cleaned anyway. Dust and particles in the air (like cigarette smoke) can be built in the circuitry of the motherboard and the case of hot and / or corrosion.

The first thing you do is disconnect the computer. Then open the case to access the motherboard. Open the case is different. If you do not know how to open the case, look at the back of the computer together with The Edge for a few screws. May hold the screws in the side panel or U-shaped panel overturned that includes top and side. Remove the screws will allow you to remove the cover. Other cases have screws on the front of the computer.

To access the screws, you must first remove the front panel by pressing the button hidden. Cover available to provide easy access to your computer, so if you look hard enough, you must understand how to remove it. Remember that if you touch something on the motherboard, you must be a ground to touch the metal chassis of the computer with your other hand or using a special grounding device. The goal of cleaning the motherboard is to remove all dust and debris from the motherboard and all components in the case. This can be done by using one of three methods. The preferred method is to use that compressed air to blow out.

Can always take a position on the right to prevent the propellent chemicals which can damage or corrode components from the exit. Dust and dirt must be swept away by the mother and from the case. Another way to remove dust using vacuum. General advice is to only use the vacuum, because the battery AC powered vacuum causes static and static can damage the motherboard. I used AC powered vacuum (before I know it's not recommended) to clean my motherboard many times and never cause problems, but I just lucky. When using the vacuum, keep the nozzle a few centimeters from the motherboard or other components in a way that does not come into contact with them and so that each small component is not sucked into the void.

If you do not have a can of compressed air or vacuum, you can use a dry cloth and brush to clean the motherboard. Be careful not to disconnect or remove anything with this method. While cleaning the motherboard, be careful not to disconnect the cable or any loose or moving parts, such as jumpers. Methodically cleared in all cases that occurred in all the motherboard from one end to the other, and all other components. Do not forget to clean the fans and heat sinks. Do not open the electricity or any of the inherent in the fan. If so, you can get a very surprising and damage your computer.

If your computer does not work when you collect more, clearly, that have been released during cleaning. Opening the case back up and encourage them and all connections to the card slot. Looking for something that can be removed. Cleaning the motherboard is the most dangerous form of cleaning, but it needed to avoid a rapid death of your computer.